বিস্তারিত
This test kit measures
three key water parameters pH, Ammonia/Ammonium (NH3/NH4+), Nitrite (NO2-)
·High Accuracy - Comparison of colour card, test result at a
glance.
·Easy To Use
·Manual included
·pH Acidity & Alkalinity in your water plays a huge role,
some fish has a huge pH value tolerance and some doesn't, do a research and you
will know what's the best for your dear ones! Ammonia & Nitrite are one of
the most toxic substances accumulated over time in your water. They are mostly
come from fish waste & uneaten food. So beware and test it out!
·Instruction for PH: Rinse the test tube with the water to be
tested, and put 5 ml of water to be tested into the test tube. Add 5 drops of
No. 1 reagent to the test tube and shake it from side to side. Add 5 drops of
No. 2 reagent to the test tube and shake well. Wait for 1 minute or so to
compare the color in the blank of the color chart. The color closest to the
color of the color card is the content of Ammonia in the water sample. After
the test, rinse the test tube with tap water for the next use.
·Instruction for NO2: Rinse the test tube with the water to be
tested, fill 10ml of fish tank water into the test tube use the provided spoon
to add a flat spoon in test tube shake well after adding and wait 3 minutes
after dissolving place the colour card behind the test tube and compare the
colour to observe the values after the test,rinse the test tube with tap water for next
use
·Instruction for NH3/NH4(amonia): Clean the tube, add in 5ml water Add in 5
drops solution 1 Add in 5 drops solution 2 Wait 1 minute, compare with color card Clean the tube after test
·Note: If you are injecting CO2, you should test your water at
the same time of day each time your test as dissolved CO2 can temporarily lower
your pH during the daytime when your system is running